How to Check for a Water Leak: Easy Steps to Identify and Fix Issues
Water leaks can quickly become an expensive and disruptive problem if left undetected. From higher water bills to damp walls and property damage, even a small leak can have big consequences.
At Gate Leak Detection, we know how easy it is for leaks to go unnoticed – and how much money homeowners can save by spotting the signs early.
Here’s how to check for a water leak, what to look for, and when it’s time to call a professional.
Understanding Water Leaks
A water leak isn’t always obvious. A dripping tap or a constantly running toilet may seem minor, but over time they can waste thousands of litres of water.
- A leaky toilet can waste up to 400 litres a day – that’s nearly half a tonne of water.
- A dripping tap could lose over 5,000 litres a year.
Learning how to identify leaks and regularly monitoring your water meter and stop tap can help you catch problems before they escalate.
Identifying the Signs of a Water Leak
Some leaks are easy to spot – others are completely hidden. Look out for:
- Dripping taps or toilets that continue running after flushing
- Damp patches on walls, ceilings, or floors
- Low water pressure or a hissing sound from pipework
- Mould growth or musty odours
- Unexplained increases in your water bill
If you spot any of these warning signs, it’s important to investigate quickly. Left unchecked, even a small leak can lead to structural damage, rot, or electrical hazards.
Common Causes of Water Leaks
Leaks can occur anywhere within your plumbing system, but common causes include:
- Worn-out washers and faulty valves
- Damaged pipework from ground movement or corrosion
- Leaks in appliances like washing machines and water tanks
- Cracked joints or fittings
Minor issues can often be fixed easily, but hidden or underground leaks typically require professional leak detection equipment to locate precisely.
Checking for Leaks Inside Your Home
You can carry out a simple at-home leak test using your water meter:
- Turn off all taps, appliances, and your internal stop tap.
- Take a water meter reading and note the numbers.
- Wait a few hours without using any water.
- Take a second reading.
- If the meter reading has changed, water is still flowing — meaning there’s likely a leak inside your property.
- If the meter reading has changed, water is still flowing — meaning there’s likely a leak inside your property.
Also check:
- Around toilets (try placing dry tissue near the base or under the cistern).
- Beneath sinks and baths for damp patches or water stains.
- Near your boiler and heating system for pressure loss.
Using a Meter to Check for Leaks
Your water meter is one of the best tools for identifying hidden leaks.
- Record your usage regularly to spot unusual spikes.
- Compare readings before and after suspected leaks.
- Many water suppliers offer a leakage allowance if you repair leaks quickly, so it’s worth reporting issues promptly.
If you’re unsure how to take a meter reading or interpret your results, your local water supplier or a specialist leak detection company can assist.
Leak Detection Methods
If your DIY checks don’t reveal the source, it’s time to call in professionals.
At Gate Leak Detection, we use a range of non-invasive leak detection methods, including:
Acoustic Listening
to pinpoint leaks through walls and floors
Thermal Imaging
to detect hidden moisture or hot water leaks
Tracer gas testing
for buried or inaccessible pipework
These techniques allow us to locate the leak accurately without unnecessary digging or damage, saving you time, stress, and money.
Checking for Leaks Outside the Home
Leaks outside are harder to spot but can cause significant water loss. Look for:
- Wet patches or pooling water in the garden or driveway, even in dry weather
- Muddy or sunken ground near supply pipes
- Unexplained puddles near outside taps or stop valves
If you suspect a leak outside your property boundary, contact your water supplier. If it’s within your boundary, a private leak detection service like Gate Leak Detection can help trace and repair it.
Assessing the Severity of a Leak
Not every leak is an emergency, but even small ones can worsen over time.
- Minor drips may be handled with basic plumbing repairs.
- Persistent dampness or hissing noises suggest a hidden or pressurised leak – best left to professionals.
If you’re unsure how serious the issue is, err on the side of caution. A professional engineer can assess the severity and recommend the best course of action.
Understanding Leakage Allowances
If you’re on a water meter, you may qualify for a leakage allowance from your supplier if the leak is repaired quickly.
Typically, you’ll need to:
- Notify your supplier as soon as the leak is found
- Provide proof of repair (such as an invoice or photo)
- Meet any timeframes set by the provider
While each supplier’s policy varies, this allowance can reduce or remove the cost of water lost during the leak.
Preventing Future Leaks
Once your system is watertight, a few simple habits can help prevent future issues:
- Check your stop taps and pipes regularly.
- Insulate outdoor pipes before winter.
- Keep an eye on boiler pressure and fix drips early.
- Schedule annual inspections of your plumbing and heating system.
Proactive maintenance is the best defence against costly water damage.
When to Call Gate Leak Detection
If your checks reveal signs of a leak — or you’re simply not sure — don’t wait for it to worsen.
At Gate Leak Detection, we specialise in:
- Non-invasive leak detection using advanced technology
- Accurate diagnosis without digging or disruption
- Rapid response across the South East
Our engineers will find the leak fast, confirm its location, and help you prevent further damage or water loss.
Contact Gate Leak Detection today to arrange a professional leak survey or learn more about our Mains Water Leak Detection services.